Shop

Concrete Paver
May 12, 2021
Three-Roller Leveling Machine
May 12, 2021

Grinding Machine

The grinder is a grinder that uses a grinding tool coated or embedded with abrasives to grind the surface of the workpiece.

Consultation hotline: 18766864914
Category:
Description

The grinder is a grinder that uses a grinding tool coated or embedded with abrasives to grind the surface of the workpiece. It is mainly used to grind high-precision planes, inner and outer cylindrical surfaces, conical surfaces, spherical surfaces, threaded surfaces and other profiles in workpieces. The grinding machine control system uses PLC as the control core, and the text display is the control mode of the man-machine dialogue interface.


The man-machine dialogue interface can talk to people about equipment maintenance, operation, failure and other information; the operation interface is intuitive and convenient, program control, and simple operation.


The man-machine dialogue interface can talk to people about equipment maintenance, operation, failure and other information; the operation interface is intuitive and convenient, program control, and simple operation

The principle of grinding machine:

The grinding machine is controlled by a stepless speed regulation system, which can easily adjust the grinding speed suitable for grinding various parts. Adopt electric-pneumatic proportional valve closed-loop feedback pressure control, which can independently control the pressure device. The upper plate is equipped with a slow-down function to effectively prevent the thin and brittle workpieces from breaking. Through a time relay and a grinding counter, the grinding time and the number of grinding cycles can be accurately set and controlled according to the processing requirements. The pressure mode can be adjusted during work, and when the grinding time or lap speed is reached, it will automatically stop and give an alarm, realizing semi-automatic operation.

The grinder is a grinder that uses a grinding tool coated or embedded with abrasives to grind the surface of the workpiece.

The grinder is a grinder that uses a grinding tool coated or embedded with abrasives to grind the surface of the workpiece.

Matters needing attention in grinding machine operation:


The operator must be familiar with the general structure and performance of the equipment, and must not use the equipment beyond performance.
The sum of parts and grinding volume must not exceed 90% of the volume of the hopper. After the power is turned on, dry running should be carried out smoothly without abnormal noise. Otherwise, it should be shut down for inspection. Before the workpiece is ground, the workpiece must be degreasing and decontamination treatment. During the processing, it is necessary to add abrasives and control the amount of water added in a timely manner according to the grinding situation of the workpiece. When the work is finished, cut off the power supply, clean the equipment, and do a good job of equipment maintenance. Safety operating procedures Before starting up, check the fastening screws and check whether the rotation of the motor shaft is flexible. When the equipment is in operation, it should stop as soon as any abnormality is found. Every 6 months, lithium-based grease should be added to the oil filling port of the vibration motor or the rotating shaft. After get off work, the power should be cut off.

Mainly used for grinding high-precision planes, inner and outer cylindrical surfaces, conical surfaces, spherical surfaces, threaded surfaces and other profiles in the workpiece

Mainly used to grind high-precision planes, inner and outer cylindrical surfaces, conical surfaces, spherical surfaces, threaded surfaces and other profiles in workpieces

Our company is professional: leasing and leasing of grinding machines_manufacturer