Five Safety Precautions For Asphalt Paving

concrete-paving-machine-choose-asphalt-contractor
All You Need to Know About Paving
September 23, 2021
concrete paving machine manufacturers
What Factors To Look For In Paving Machines When Choosing One
November 29, 2021
Safety Precautions For Asphalt Paving

Asphalt surface on the street was demolished due to poor construction.

Safety Precautions For Asphalt Paving by floor paving machine

For paving, you need to get the best floor paving machine. While using these machines, you need to have some safety precautions to avoid asphalt paving accidents. Continue reading to know more about safety precautions that must be followed for asphalt paving.

The safety precautions discussed show the aspects that need to be also improved to guarantee high machinery performance. Try to use high-quality asphalt materials in your projects. Buy quality machines from concrete paving machine manufacturers. All the staff performing these operations must be trained.

Take Care When Machine Getting on And Off:

The major cause of injury to machine operators and truck drivers is getting on and off the machine. For moving a piece of equipment like a paver, make sure you are mounting and exiting the machine properly. This is the main thing for your safety. Follow these steps:

  • Check your gloves and boots.
  • Clean the mud off before climbing, and use gloves that are of high grip for a secure handhold.
  • Use a three-point stance going and coming.
  • Use large-size hands and footholds.
  • Securely engage the entire hand and foot, avoiding a toe-hold or finger-hold grip.
  • Use a stepladder for access when no hand or footholds are provided.
  • Avoid carrying objects while climbing.

Allowing People To Crowd The Work Area Is Not A Good Idea:

People enjoy seeing the operator condense the carpet from a distance. They are present there due to their habit rather than necessity. People on the ground must keep a safe distance from the machine’s working area.

Use the horn to tell people to stay back when you are ready to work. Always check your back before backing up the machine.

Asphalt surface on the street was demolished due to poor construction.

Obstructions In The Air Or Below Ground:

Keep an eye out for overhead obstructions and underground utilities such as:

  • Electricity lines
  • Water
  • Sewer
  • Gas
  • Telecommunications.

Make sure all dump operators are aware of overhead lines or low clearances. Obstructions can be marked with sawhorses, placards, and barrier tapes.

Equipment For Loading And Unloading:

During loading or unloading, there is a risk of machine roll-over. Make sure you are in the middle of the ramps and staying straight. Allow ample space for the trailer and equipment to maneuver. For guidance, use a spotter. Before turning, be sure the machine has cleared the ramps. Also, keep people away from the edges of the machine.

Ensure That The Paving Area Is Properly Secured:

The beginning of your crew’s safety training is only the beginning. They must also be protected from the public. This is performed by crew members who are visible in a well-marked work zone with signs and barricades instructing traffic to stay out or slow down.

Contractors should create temporary traffic control plans for their job sites and follow the criteria laid out. All crew members wear adequate luminous safety equipment, sufficient lighting should be available in the work zone. Workers should be encouraged to avoid working in dimly lit places.

Leave a Reply

Your email address will not be published. Required fields are marked *